As time passes, your motorcycle's upholstery wears out. When you feel uncomfortable when you are on it, it is high time to renovate it . Here are some tips and tricks for redoing your motorcycle saddle . This will optimize your comfort while driving.

Reinforce the foam of your motorcycle saddle for more stability and comfort

To ride for a long time without having to stop every time , it is important to have a comfortable motorcycle saddle. Sometimes, due to poor saddle covering, the rider and passenger may experience harder foam, discomfort in the lower back or even slipping. These are inconveniences that are likely to spoil your roadtrip.

In order to correct this, it is best to use faux leather covering . You can also add a much denser layer of foam before covering it. This will guarantee great comfort for the biker. This technique is valid for any brand of motorcycle: Yamaha, BMW, Honda, Harley Davidson…

Create a backsplash for better lumbar support

To boost your comfort when driving , your motorcycle saddle must be flexible and thick enough. Inserting gel into the foam is the best alternative. However, it is also possible to add a backsplash to benefit your back . To do this, you must add foam according to your body shape so that the saddle is ergonomic.

If this operation seems difficult to you, you can call a motorcycle saddle specialist . He will be able to create a tailor-made backsplash for you. It's very practical for personalizing your motorcycle scooter.

Adjust the saddle to optimize ground clearance

Good ground clearance is important to give the driver more confidence. The height of the saddle therefore plays an important role. In order to redo the upholstery of your motorcycle in an ergonomic way , two cases are possible, depending on the length of your legs.

To reduce the ground clearance, simply scrape the foam from the saddle using a sander. The regular curves will thus be kept. If you have fairly long legs, the solution would be to add more foam . In this case, you must also change the coating. Non-slip faux leather would be the best alternative.

Change your saddle according to the rules of the art

To be able to rebuild the saddle of the pierced motorcycle, you will have to dismantle it:

• Remove the clips that secure the saddle to the plastic shell using a screwdriver,
• If the foam is torn, use neoprene glue to glue the pieces back together,
• Place the foam vertically for a few hours if it is damp or soaked in water,
• Use a hairdryer so that the foam is completely dry.

To be able to replace the saddle covering , you will need to start from the front. You must stretch the leather well and secure the interior edges of the hard plastic part with a staple.

If you find that the interior foam is still in good condition, but only the liner has holes, there is no need to remove everything. All you need to do is apply waterproof tape that you can find in DIY stores to the pierced part.

Make a custom cover

The best tip for making a custom cover is to use the old covering as a model. This is the safest way to cut the new cover without making any mistakes. For more grip, make a cut extending a few centimeters. This will also allow better twisting. This is a very delicate step, because you must do it without making creases on the leatherette. If it is difficult to stretch, you can heat it with a hair dryer or a heat gun.

Once you have successfully cut the new cover to size , all you have to do is glue it to the foam. You can arrange the latter with the help of a cutter to dig out the pilot's place, fill the holes, add a layer of foam, etc. It is good to point out that carrying out this operation alone will increase the risk of error. Get help to be more successful in renovating your motorcycle saddle .