Motorcycle Comfort Seat Cushion

Ride long hours on a motorcycle, while being comfortably seated!

Let's face it. Motorcycle seats are not that comfortable.
As a motorcyclist, you know all too well the aches and pains of riding a motorcycle on long journeys .
Our motorcycle comfort seat will minimize the annoying bumps and vibrations that plague all motorcyclists and make your rides more comfortable than ever!

These pads provide an extra layer of padding between you and the seat and will completely change your riding experience!

The cushion itself is made up of a set of cells that communicate with each other and that we will fill with air. This communication between the alveoli will thus make it possible to better distribute the pressure points of the buttocks over all the air bubbles rather than over 2 specific zones under the buttocks.

Thus, when you move even a minimum on the saddle , the cushion absorbs vibrations.
The buttocks are thus stimulated thanks to the circulation of the air pressurized by the weight of the motorcyclist , promoting good blood circulation and preventing painful pressure points .

It's sort of the same technology used for medical pressure relief cushions. Air convection technology produces an anti-gravity effect that helps provide support for the spine , thighs and hips.

In addition, its honeycomb structure and the breathable fabric of the cover prevent the accumulation of heat and the formation of unpleasant sweat.

Thanks to its non- slip underside in contact with the saddle, and the retaining straps surrounding the saddle, the cover guarantees optimal positioning of the cushion

Finally, the integrated valve makes it very easy to regulate the volume of air to adapt the cushion perfectly to your morphology and your type of driving.

This cushion is made of a layer of polyurethane which is a strong and very light plastic material. It is ideal for travelers who want to enjoy long motorcycle trips without having a sore butt after a few hours. Its easy installation, its contained price and its incomparable comfort will accompany you for a long time on the road of the holidays! 

Installation on the saddle of the motorcycle

The installation of the cushion on the motorcycle is simple and quick.

You will have to pass the straps through the cover, scratch the straps under the saddle by removing it and you're done.

Comfort on the road

For optimal comfort of the cushion, it must be inflated to the maximum then deflated it gradually by sitting on it until your buttocks are sunk into the cushion. Then, we move on the saddle and we distribute the air, checking that there is no more than 1 cm of air.

Adjustment is important because if there is too much air, it is neither efficient nor comfortable.
The trick is to ride in a straight line with the valve out of the cover
and to gradually deflate while riding in order to find the optimal setting.

Once it's set, you don't touch it anymore , so it's an adjustment to be made once and for all.

The motorcycle saddle pad provides the feeling of floating above your saddle. It “moves” with the air that circulates under the buttocks when you make a slight movement, once wedged and accustomed, it's very pleasant. We literally have our buttocks stuck in the cushion.

As soon as you start to feel a slight pain , you move a little, without lifting your buttocks and this changes the pressure zone on the part of the body in contact. This prevents the formation of painful areas.

Specifications:

Material : Polyester fiber (3D mesh fabric) TPU (airbag)

Size L : about 30*31cm

Size XL : about 36 x 38 cm

Color : black Applicable models:

Facility :

1. Turn the buffer valve counterclockwise to open it.

2. Inflate with the pump until the cushion is full of air.

3. Turn the valve clockwise to close it

4. Place the air bag on the motorcycle with the air bag facing up. Sit in the seat in a normal sitting position. Put your feet on the hooks. Adjust the air by opening the fill valve and releasing air until you sink into the cushion. Close the fill valve. The ideal inflation is about 1/2 inch from the seat. If you go down on the seat base, add air through the fill valve and adjust again.

Do not over inflate. This product works most efficiently with a minimal amount of air.

6. Turn the valve clockwise to close it.

You can check that you haven't let all the air out of the pad by slowly tilting your body (not necessarily your bike) from side to side. You should be able to feel the air shift slightly under you. If you feel the air is too strong, push more air out of the cushion.

Contents of the package:

• 1 x Inflatable Cushion
• 1 x Cloth cover
• 1x Pump

Admire the sights and sounds of nature while fully enjoying your ride, comfortably seated on your motorcycle seat cushion .

Customer photo report: