Motorcycle brake fluid bleeder

Pneumatic machine for replacing car or motorcycle brake fluid.

No more hassle of replacing the brake fluid on your motorcycle or car.
Easily replace the brake or clutch fluid on your motorcycle or car without anyone's help in 5 minutes flat with the Pneumatic Fluid Bleeder.

When the frame is connected, the negative pressure in the pump is generated and the waste oil is sucked out . Maintain the air inlet pressure of the air pump at 6-8 bar and then add new fluid simultaneously.
This saves you from having to press the pedal or brake handle back and forth.

The pneumatic brake fluid bleeder is easy to use; it allows a single person to drain the brake fluid and carry out the change very easily.

Say goodbye to the work of two people . Abandoned the traditional method of replacing the liquid, tiring and boring, thanks to the pneumatic drain, no more stains on the floor!

Especially since brake fluids are very corrosive to plastics. It will allow you to limit any risk of incident or damage to your mount.

Characteristic :

• Type: Brake or clutch fluid replacement tool
• Material: Plastic + metal
• Universal for motorcycle/car

Manual :

1. Remove the used brake fluid from the reservoir;
2. Put the new fluid back into the reservoir;
3. Start the car and connect the pipe between the equipment and the brake bypass pump;
4. Turn the screw so that it is loose, but not all the way. Then open the valve to start siphoning the liquid. Please turn off the valve after screwing it when finished.
5. Our tool suitable for universal cars, you can use the tapered nozzle which is offered in the package to prevent air leakage;
6. Please lift the tool above the brake pump to ensure it is working properly.